Fagor CNC 8070, Operating Manual

Page: 40 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
1.
GENERAL CONCEPTS
Descr
ip
ti
on of
t
he key
s
(S
OFT
V03.0
X
)
6
1.3.2 Keyboard layout
Depending on the utility of the different keys, the CNC keyboard may be considered
to be laid out as follows.
Work modes
To access the different CNC work modes directly.
Numeric keypad
It includes the necessary keys to enter numeric data and define the arithmetic
operations as well as the following special keys:
Automatic mode.
Jog mode.
MDI mode.
Editing - simulation mode.
User tables.
Zero offsets, fixtures and arithmetic parameters.
Tool and magazine table.
Utilities mode.
Configurable mode.
Depending on how the OEM has set this key it will be possible to:
• Access a CNC work mode.
• Execute an application.
• Access the operating system.
• Carry out no function at all.
Movement arrow keys.
They move the cursor one position to the left, right, up or down.
Previous or next page.
They show the previous or next page when the program (part-program or PLC
program) has more than one information page.
Home and end keys.
It moves the cursor the beginning or end of the line.