Fagor CNC 8070, Operating Manual

Page: 80 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
3.
AUTOMATI
C
MODE
D
a
ta
sc
reen
(
s
of
tk
eys)
(S
OFT
V03.0
X
)
46
3.3.4 Find text
To find text or a character string throughout the program.
When selecting this option, the CNC shows a dialog box requesting the text to be
found. It is also possible to select whether the search must start at the beginning of
the program or at cursor position.
To start the search, press [ENTER] and the cursor will position on the text found. By
pressing [ENTER] again, the CNC will look for the next match and so on.
To end the search, press [ESC]. The cursor will position on the block containing the
text searched.
3.3.5 Go to line
To position the cursor on a particular line of the program.
When selecting this option, the CNC requests the line number. Key in the desired
number and press [ENTER], the cursor will then go to that line.
Find text
To move the cursor through the elements of the list.
It selects an option from a group.
To start the search.
To cancel the search and close the dialog box.