Fagor CNC 8070, Operating Manual

Page: 209 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
TOOL
AND MAGA
Z
INE TABLE
Showi
ng t
abl
es and com
m
on oper
at
io
n
s
9.
(S
OFT
V03.0
X
)
175
Recall the tables
It may be used to restore the data, in ASCII format, of the tables from the files. The
tables may be loaded one by one or all of them simultaneously. In either case, the
action is carried out from the vertical softkey menu using one of the following icons.
After pressing the icon, the CNC will ask the location of the data files. Select the
desired folder and press [ENTER]. The selection process may be canceled by
pressing the [ESC] key.
Order (sequence) to follow when loading the different tables.
As mentioned earlier, there are two ways to load the table data from the ASCII files;
loading all of them at the same time or selecting each table and loading its data.
Loading all the tables at the same time.
In this case, it is up to the CNC to set the order (sequence) used to load the data.
Order (sequence) to follow when loading the tables one by one.
This way, each table is selected and its data loaded. In this case, the following
sequence must be followed when loading the tables.
1. First load the tool table.
This table defines the system tools. Loading the tool table initializes the tables of
the magazines and the active-tools table.
2. Second, load the tool magazine tables.
Since the tool list has changed, if the magazine tables are not loaded, it is not
possible to assure that the new tools are the ones located in the magazine tool
or in the active-tools table.
3. Finally, load the active-tools table.
When loading the tables of magazines, it is unsure that the current tool positions
will be compatible with the active tools.
Loading all the tables at the same time.
To load all the tables at the same time, no table must be selected. See
"9.1.1 Table selection" on page 172.
Loading each table separately.
To load the tables one by one, select each table from the horizontal softkey
menu. To load the data of all the tables (recommended), follow a particular
loading order to guarantee data consistency.