Fagor CNC 8070, Operating Manual

Page: 272 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operation manual
8070 CNC
11.
PLC
"Logi
c anal
yz
er
" ser
v
ic
e
(S
OFT
V03.0
X
)
238
11.9.3 Execute and analyze trace
Execute trace / Stop trace
It used to start or stop the data capture to display the traces.
Analyze trace
It is used to analyze the different graphic aspects of the trace.
• Go to the beginning
It moves the indicator cursor and the current graphic view to the beginning of the
trace.
• Go to the end
It moves the indicator cursor and the current graphic view to the end of the trace.
• Go to the time
It moves the indicator cursor and the current graphic view to the time value set
by the operator with respect to the base point of the trace (starting point of the
trace if there is no trigger or to the trigger point if there is one).
• Go to trigger
It moves the indicator cursor and the current graphic view to the trigger point.
• Go to reference
It moves the indicator cursor and the current graphic view to the reference point
defined earlier.
• Set reference
It sets a reference point at the current cursor position for time difference
calculation.
• Remove reference
Removes the reference point defined earlier.
Trace view / Edit view
It toggles between the graphic window and the data and display conditions area.
MS (milliseconds) / US (microseconds)
It toggles between milliseconds (0.001
-3
seconds) and microseconds (10
-6
seconds).
Print
It is used to print the graph on a printer connected to the CNC or as a BMP file in the
CNC. When printing to a file, it is saved in the folder:
"C:\Cnc8070\Mtb\Plc\Watch\*.bmp"
When selecting this option, the softkey menu shows the options available for
analyzing the trace. To return to the main menu, press the key for the previous menu.