Fagor CNC 8070 Operating Manual Download

Page: 195 / 358

161

CNC 8070

OFT

V03.0

)

USER TABLES

User table selection

The user tables consist of the following tables:

•

Zero offset table.

•

Clamp tables (fixtures).

•

Table of arithmetic parameters, global, local and common.

In order to activate a fixture zero or part zero offset, those values must be previously
stored in the relevant CNC table.

What can you do in this work mode?

The following operations are possible in this work mode:

•

Edit and modify the tables for zero offsets and parameters.

•

Save the content of a table.

•

Recover the content of a table.

•

Print the content of a table.

•

Initialize a table.

The CNC tables may be accessed from any other operating mode, even while a
program is in execution, by pressing the key for these tables.

Summary of Contents for CNC 8070







































































































































































































































































































































































Search results

Summary of Contents for CNC 8070

Reviews:

Related manuals for CNC 8070

Brands by name

Popular brands

Fagor CNC 8070, Operating Manual

Search results

Summary of Contents for CNC 8070

Reviews:

Related manuals for CNC 8070

Brands by name

Popular brands