Fagor CNC 8070, Operating Manual

Page: 138 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
6.
EDI
T
IN
G-
SI
MULATI
ON MODE
Ed
it
ing wi
ndo
w (
s
of
tk
eys)
(S
OFT
V03.0
X
)
104
File "Include program"
It may be used to import the content of a part-program into the one being edited. Any
program that may be accessed from the CNC may be imported, even the program
currently in execution.
When selecting this option, the CNC shows a list of the programs that may be
imported into the one being edited.
To import a program from the list:
1. Select the desired program from the list or write its name in the bottom window.
2. Press [ENTER] to import the program or [ESC] to cancel the selection and close
the program listing.
The selected program is added to the one being edited after the block indicated by
the cursor.
File "Print"
It is used to print the program that is being edited out to a printer connected to the
CNC.
File "Import"
It permits importing DXF, PIM and PIT files into the program being edited. See
"6.2.2 Import DXF files" on page 100.
• The DXF format is standard for exchanging graphic files. Importing this type of
files makes it possible to generate the part-program directly from a drawing. The
files must consist of points, lines and arcs.
• PIM and PIT files are part-programs used by the 8055 CNC. When importing this
type of file, its programming language is adapted to the one used by the CNC.
When selecting this option, the CNC shows a list of the programs that may be
imported into the one being edited. Select the desired program from the list and press
[ENTER].
6.3.3 Undo
To "undo" the last modifications made. The modifications are undone one by one
starting from the most recent one.
Keys for selecting a program
To switch windows.
To move the cursor thru the elements of the window.
To save the new program.
To cancel the selection and close the program listing.
The program may be selected from the list as follows:
• By moving the cursor to the desired element.
• Using the alphanumeric keyboard. Pressing a key will select the first
element from the list starting with that letter or number. Pressing it again
will select the second one and so on.
Programs may also be selected using the "File search" option of the softkey
menu.
i