Fagor CNC 8070, Operating Manual

Page: 87 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
AUTOMATI
C
MODE
G
raphi
c sc
reen
(
s
of
tk
eys)
3.
(S
OFT
V03.0
X
)
53
3.5.5 Measurement
To measure the distance between two points. This option is only available for the types
of graphics "XY", "XZ", "YZ" and "Solid 3D".
When selecting this option, the section being measured will appear on the graphics
with two cursors and a dashed line. The cursor currently selected will appear in red.
The dialog area will show the coordinates of both cursors, the distance between them
on the straight line and the components of that distance on the axes of the active
plane. The coordinates of the selected cursor will appear in red.
Measurement "Point1" & "Point2"
It is used to select the cursor to be moved (same as using the "+" key).
Measurement "Edit"
It is used to manually edit the position of the cursors. It is edited in the dialog area
of the graphic window that shows the position of both cursors.
3.5.6 Clear screen
It is used to clear the screen or delete the graphics displayed.
If a solid graphic type is selected, the graphic representation will be reset and it will
return to its initial state without machining.
Keys to move the cursors
To move the selected cursor.
To select the cursor to be moved.
When selecting this option, the softkey menu shows the available options. To return
to the main menu, press the key for the previous menu.
Keys for defining the measurement
To move the cursor through the data.
To validate the selected position of the cursors.