EWS UFS8000, Operating Manual, Page: 98 / 130

UFS8000 Internet 91
22. Internet
Attention ! This chapter only applies to control unit type UFS8x1x-xxxx.
The controller is provided with a web server and is to be used with Internet Explorer.
There is a “head page”, and a page with a display of the system by which the scheme is “fixed”
plus a page where the controller itself is displayed.
The texts on the web pages are in English.
22.1. Access via the local network (LAN)
The controller can be connected to the LAN (locale network).
If the network uses a DHCP-server the controller is automatically assigned a correct IP address (when
the controller starts up). Otherwise the controller will retain the IP address as specified in the Ethernet
configuration data (see § 14.1.2 “IP address” on page 69).
If the PC seeks the controller web pages in the local network, both the controller's IP address and the
controller's “local host name” can be entered in the browser's URL bar. The controller's “local host
name” consists of the type of controller and the controller's serial number.
Example:
A type UFS8000 controller with the serial number 000002 has a
local host name: “UFS8000_000002”
URL bar:
22.2. Access via internet (WAN)
It is possible to gain access to the control via the “world wide web” (internet).
The IP address (WAN) of the modem to which the control is connected to, with eventually the port
number, must be entered in the URL bar of the internet browser. See § 14.2 “Access via internet
(WAN)” on page 70 for more information about setting up the modem and the IP number of the
modem.
22.3. Security
The internet pages are secured with a user name and a password. If the controller is accessed via the
HTTP connection (internet) the following window will appear
If the correct information is entered, access will be allowed to the internet pages.
The standard settings for the user name and password are:
User name : <type of controller > = “UFS8000”
Password : <empty> = “”