EWS UFS8000, Operating Manual, Page: 74 / 130

UFS8000 Clock 67
12. Clock
12.1. General
The time and date can be set in the
controller.
The time and date are used in various
functions, such as data “logging”.
The clock setting option is located in the
main menu.
The controller has a battery so the time and date can be kept. If
the controller is switched on again the time and date have to be reset. In the case of summer time and
winter time, the time and date have to be adjusted manually.
12.2. Time setting
The time setting window can be used to
change the hours, minutes and time format.
The general operation for entering a value
(see § 4.3.1 “Set value or text” on page 9) is
used to change the hours and minutes.
The general operation for making a choice
from a list (see § 4.3.3 “Set dropdown list” on
page 9) is used to change the time format.
There is a choice between a “12-hours” (“03:34 AM”) and a
“24-hours” format (“16: 54”).
The changed time is directly up-to-date.
The time format will also apply directly. However, this is not stored when you quit the
main menu.
12.3. Date setting
The date setting window can be used to
change the years, months, days and the date
format.
The general operation for entering a value
(see § 4.3.1 “Set value or text” on page 9) is
used to change the years, months and days.
The general operation for making a choice
from a list (see § 4.3.3 “Set dropdown list” on
page 9) is used to change the date format.
There are three formats to choose from.