EWS UFS8000, Operating Manual, Page: 84 / 130

UFS8000 SD card 77
The “Header” field (appears only if the CSV format is set) can be used to indicate if an
information line has to be added after a specific number of lines with status /
measurement information (in the above example after 10 lines ). An interval of
between 1 and 999 lines may be specified. The data is separated by a comma.
For more details about the log functions and the format type see § 20.2 “Data information” on page 85.
Data
The “Data” option is for setting which data is logged.
For this the field of the corresponding function has to be
“checked”. The status of the measurement value of the
corresponding function will then be featured in the information
line.
15.4.3. Process log function
This window can be used to activate the process log function. The data is stored in
ASCII format and cannot be set. The format appears as follows:
date time unit (sub) process
If the controller has been voltage free this is also indicated in the file, with the date and time the
controller was switched on and off.
The size of the file may vary somewhat. Roughly 50 bytes can be counted on for each process change
or power failure.
For more information about the log function see § 20.3 “Process data” on page 87.