EWS UFS8000 Operating Manual Download Page 15 | Manualshive

Page: 15 / 130

EWS UFS8000 Operating Manual Download Page 15

UFS8000

General operation

8

4. General operation

A touch panel is used for the operation and programming of this controller.
Details are provided below about the general arrangement of the screen, the meaning of the various
“keys” and the general display /input windows.

4.1. Main screen

In the main screen the keys have the following functions:

To the menu.

To the alarm window

4.2. Menu

You can select the different items within the menus. The selected item will be displayed in yellow and
the subordinate menus or windows will be displayed.
If the selected menu consists in several submenus, the two last menus will be displayed. The menu
can be closed by pressing the

button.

If the number of menus is bigger than the number of available positions, the menu will appear in a
scroll bar. The previous or next (invisible) items are reachable through the up and down arrows.

«
...
13
14
15
16
17
...
»

Summary of Contents for UFS8000



































































































































Reviews:

No comments