EWS UFS8000, Operating Manual, Page: 82 / 130

UFS8000 SD card 75
15.3. Software files
The controller is routinely delivered with the latest Software version (at that time).
If further changes are subsequently made in the software the software may be adapted by copying the
original software to a SD card and loading via the Boot program in the controller (see § 27 “Boot
software” on page 104). Get in touch with your supplier to obtain the latest version.
Once the original software is loaded, the controller will be reset to the factory settings.
You need to reset the controller with the settings you require.
After the settings have been changed, these settings may be stored together with the software as a
back-up. The back-up may be used, for example, to secure the settings of a, normally, properly
functioning unit, prior to making settings or software-related changes.
To make a back-up see § 19.2 “Back-up by the end user ” on page 83.
If the back-up made has to be replaced you may use the
boot program again (see § 27 “Boot software” on page 104).
15.4. Log functions
There are three types of log functions: alarm logging, data logging (status / measurements) and
process information logging. As for how these can be set, first of all the SD card function has to be
switched on to access the log functions. See the windows below.
Attention!
The SD card function has to be switched off before the SD card can be removed from the
controller.
This is to prevent the files from becoming unreadable.
Files in XML format are therefore correctly closed.