
UFS8000
79
16.1.4. E-mail address of the recipient
There is an option to enter the e-mail address of the recipient
(where the controller has to send the-mails).
An e-mail address with up to 55 characters may be entered.
16.2. Log functions
If an (alarm) warning has occurred in the system a warning can be given via e-mail. The “Log” option
then has to be chosen in the “Email” menu.
16.2.1. Alarm log function
If an (alarm) warning has occurred in the system a warning can be given via e-mail. The “Alarm Log”
option then has to be chosen in the “Log” menu.
If the alarm log function is activated (in “Properties”) option the “Alarms” option will be automatically
displayed.
Properties
The “Properties” option allows the alarm log function to be activated and the “format” of the information
sent to be specified (only the CSV format is available at the present time).
The message in the e-mail is established as follows:
date, time, status of the warning (on/off ),description of the warning,
phase where the warning occurred (where relevant ).
For more information about the log function see § 20.1.1 “CSV format” on page 84.
Warnings
The “Alarms” option can be used to set which (alarm)
warnings will require an e-mail to be sent.
For this, the field for the corresponding warning has to be
“checked”.
An e-mail will then be sent at the time the situation occurs
and when the situation is removed.
Summary of Contents for UFS8000
