
UFS8000
RS485 / RS232
82
17.2.3. Process log function
This window can be used to activate the
process log function.
The data is sent in ASCII format and cannot be set. The format appears as follows:
date time unit (sub) process
If the controller has been voltage free this is also indicated in the file, with the date and time the
controller was switched on and off.
For more information about the log function see § 20.3 “Process data” on page 87.
17.1. Modbus
On the RS485 line you have the possibility to activate a Modbus compatible function (see
“Properties”). The protocol and the device address in the network can be set. See § 21 “Modbus” at
page 88 for more information.
18. RS232
Attentie !
Dit hoofdstuk is alleen van toepassing voor de besturing type UFS8x1x.
The control unit has a RS232 connection.
This RS232 c onnection can be used for
logging data (status/measurements), alarms
and process data.
The settings and options for the RS232
connection are equal to the options for the
RS485 connection. How everything can be
set can be seen in chapter § 17 ”RS485” on
page 80 .
In that case the screen number needs to be
increased by 200 each time.
Summary of Contents for UFS8000
