EWS UFS8000, Operating Manual, Page: 90 / 130

UFS8000 Hard disk 83
19. Hard disk
The controller features a memory used as a hard disk.
When software files are being installed items such as languages and web pages are written to the
disk. The settings are also stored here as well as the last 20 alarms .
The hard disk data may be copied to a SD card.
There are two copying functions:
- Copying function for the fitting contractor
- Copying function for the end user
19.1. Back-up via the fitting contractor
This can be done by the fitter for standard units, which nearly always have to be set the same, so the
settings have to be made only once after the new software in installed. These can then be stored on a
separate SD card with OEM software, see also “SD card” on page 74 (§ 15.1 t/m § 15.3), The SD
card can then be used to copy the data to corresponding units.
§ 23.5 “Hard disk” on page 96 describes how “OEM back-up” can be achieved.
19.2. Back-up by the end user
The end user may also make a back-up. A SD card on which
no original software or “OEM software” is stored is placed in
the SD card holder, see “SD card” on page 74
(§ 15.1 t/m § 15.3).
The back-up can be made via the “Media” menu. If the
window of the “Harddisk” option is opened, the back-up can
be made.