EWS UFS8000, Operating Manual, Page: 40 / 130

UFS8000 Components 33
6.7.7. Monitoring minimum flow
For monitoring purposes the minimum limit of 0,1 to 10.000,0 can be entered.
A delay can also entered (1-9999 sec). During the delay the measured value has to be under the limit
so an alarm is given if the unit is switched off.
You can set if the unit actually is switched off (“Switch off”).
If the monitoring is not switched on (“Monitor”) the monitoring will not appear in the programming list of
phases.
6.7.8. Monitoring maximum flow
For monitoring purposes the maximum limit of 0,1 to 10.000,0 can be entered.
A delay may also be entered (1-9999 sec). During the delay the measured value has to be under the
limit so an alarm is given if the unit is switched off.
You can set if the unit is actually switched off (“Switch off”).
If the monitoring is not switched on (“Monitor”) the monitoring will not appear in the programming list of
phases.