
UFS8000
Information and history
60
10. Retrieve information
Various types of data can be retrieved from
the information menu, such as: the Software
version, the service telephone number, the
number of service hours, the status of the
inputs and outputs, the alarm history, the
maintenance interval (if programmed).
The information menu is located in the main
menu.
The various information windows are discussed in the following sections.
10.1. General
This window shows the Software version and the serial
number.
The software is a combined package of various files (including language files) and the application
software
- sw: software version of the complete software package
- ap:
software version of the application software
- sn:
serial number of the controller
The serial number is important for making a back-up on the SD card and for identification during
communication (RS232, RS485, Ethernet).
10.2. Service number
The window provides information about the service telephone number, which is
programmable as described in § 23.1 “Service number” on page 95.
10.3. Inputs
The window shows the status of the inputs.
A line is established as follows:
<number> <description > <status>
<number >
: indication of input on the print (1=”IN 1”)
<description > : brief description of the function
<status>
: input status (“-” input is non-active, “|” input
is active)
Summary of Contents for UFS8000
