EWS UFS8000, Operating Manual, Page: 24 / 130

UFS8000 Components 17
6. Components
An examination is made in this chapter of the inventory and programming options for the various
components that have to be connected.
This component may divided into:
- Valves
- Pumps
- Alarm
- Switches
- Storage tank
- Other
Where a reference is made in this chapter to
inventory, this means the window located via
the “Installation – Inventory” options. See §
5.1 “Inventory” on page 12 for more
information.
Where a reference is made in this chapter to
the programming of a component this means
the window located via the “Installation –
Programming – Components" options.
6.1. Valves
The valves may be connected only to the relay output functions (OUTx). Furthermore, a safety switch
can be activated for the respective valve (see § 5.1 “Inventory” on page 12).
Whether a valve is open or closed can also be determined for each process stage.
The “Permeate valves” are alone in having other settings on top of the inventory settings.
6.1.1. Air valve
In the case of the “Air valve” all that has to be entered, in
the inventory, is the relay output it is connected to.
A security switch can be activated. This can be linked to one
if the available inputs, and it can be set if the switch is
“normally closed” or “normally opened”.
For more information, see § 5.1 “Inventory” on page 12.
6.1.2. Inlet valves
In the case of the “Inlet valve” all that has to be entered, in
the inventory, is the relay output it is connected to.
A security switch can be activated. This can be linked to one
if the available inputs, and it can be set if the switch is
“normally closed” or “normally opened”.
For more information, see § 5.1 “Inventory” on page 12.