EWS UFS8000, Operating Manual, Page: 88 / 130

UFS8000 RS485 81
17.2.1. Alarm log function
If an (alarm) warning has occurred in the
system a warning may be given via the
RS485 connection on a PC, by means of an
RS232 / RS485 converter, which is not
included in the delivery.
The “Alarm Log” option then has to be chosen in the “Log” menu.
The alarm log function is activated in this window and the “format” of the information sent can be
specified (only the CSV format is possible at the present time).
date, time, status of warning (on/off ),description of the warning,
phase where the warning occurred (where relevant ).
For more information about the log function see § 20.1.1 “CSV format” on page 84.
17.2.2. Data log function
In order to check the quality of the water at a
later time, for example, the measurement
value can be logged.
Towards this end, the data log function has to be activated (in “Properties” option).
Properties
The “Properties” option is used to activate the data log
function and specify the “format” of the information sent (only
the CSV format is possible at the present time).
An interval time of between 1 and 9999 minutes may be
specified for logging.
The “Header” field (appears only if the CSV format is set) can be used to indicate if an
information line has to be added after a specific number of lines with status /
measurement information (in the above example after 10 lines ). An interval of
between 1 and 999 lines may be specified. The data is separated by a comma.
For more details about the log functions and the format type see § 20.2.1 “CSV format” on page 86.
Data
The “Data” option is for setting which data is logged.
For this the field of the corresponding function has to be
“checked”. The status of the measurement value of the
corresponding function will then be featured in the information
line.