Europlex 3GS, Manual

Page: 247 / 386

9-30
P
ASSING AND
V
OIDING
C
ARDS
Once a Card ID has been assigned, the card can then be passed into the system.
Card Range
Enter the range of cards to be passed, from 1 to 9999. To pass a single card, enter the
card number and press the key twice.
Once the card(s) has been passed, you will be prompted for the Access level for this/
these cards.
Change Access Level?
An Access level is a combination of a limited time period and a group of doors, so that
once applied to a card, it will limit the card user to having access to certain doors at
certain times only. Up to 250 Access levels are programmed by the installer, who will
indicate which levels should be assigned to which cards. When you have assigned an
Access level, you are prompted for the Visitor Level.
Change Visitor Level?
The Visitor Level is used to program temporary cards, which will only be valid for a certain period of time (between a
given Start Date and End Date). The system allows for up to 250 different Visitor levels, which are programmed by the
installer. Once assigned, you are then prompted for a Function level.
Change Function Level?
Function levels give the user the ability to set/arm and unset/disarm an Area by presenting a card to a reader outside
the Area entrance door. A Function level will give a card 3 extra capabilities: to unset/disarm an area from the outside,
to unset/disarm an area from inside, and to set/arm an area once you have left (by swiping your card at a reader near
the exit door). Up to 250 Function levels are programmed by the installer. When you have assigned a function level,
you are prompted to change the PIN code requirement for the card.
Note Please consult your installer on the correct procedure for setting/arming or unsetting/disarming the system
using your card.