Europlex 3GS, Manual

Page: 227 / 386

9-10
P
ART
S
ET
/U
NSET
I
NDIVIDUAL
A
REA
Your system will be set up as either:
●
a standard alarm system with one alarm area, or
●
a multi-area system, with up to 30 separate alarm areas
within one.
A standard alarm system is set/armed using the Part , Half , and
Full procedures.
The Part and Half keys are used to unset/disarm and set/arm
individual areas within the multi-area system.
Part Set
With a standard alarm system, you can isolate particular areas
of the premises and set/arm these areas independently of the
rest of the system.
Part Set allows you to protect the perimeter of a premises
while allowing free movement through the exit and access area
(e.g. from door, hall).
This would typically apply to the day or evening operation of
the system when people are on the premises and using the
common exit. There is free access to the areas being used while
the rest of the building is armed.
There are no entry or exit times associated with this mode and
protection is applied instantly.
The display remains blank and will only change to show alert and warning messages.
If selected while entering the building while the entry timer is running, the entry mode is cancelled and the buzzer is
silenced.
●
If selected by mistake refer to “Unset/Reset”.
●
If unable to set/arm refer to “Unable to Set”.