Europlex 3GS Manual Download Page 352

Page: 352 / 386

17 - 8

Creating New Accounts

New accounts can be created by clicking on File on the

Menu Bar across the top of the screen, choosing New from

the drop down menu and then choosing Account.

Alternatively clicking on the down arrow on the New

Account/Installation icon on the Toolbar, then choosing New

Account will display the Account details window:

Fill in Account Name and any Comments and click OK to

proceed.

Creating New Installations

New installations can be created by

choosing File – New – Installation from

the File Menu, or alternatively clicking

on the down arrow on the New

Account/Installation icon on the Toolbar

then choosing New Installation. The

window shown opposite will be

displayed:

Note:

When creating a New Installation,

select the Account in which the

installation is to be placed from the

Account Drop-down list.

Descriptions of items:
Account

– After Setting up Accounts,

choose the relevant Account to place the

Installation into by clicking the down-

arrow button. If you wish to have an

individual installation (not part of a

group) choose the default Account "No

Account".

Installation Name

– This is the name of the installation you are creating.

Address

– This is the address of the building in which the installation is found.

System ID

– This is used for distinguishing between panels during polling, when multiple units are connected to a single

serial line. Valid values for a System ID are from 1 to 127 inclusive. The System ID shown here needs to match the one

on the panel, if the panel is to be communicated with.

Reference No

– This is recognised by communications software as a unique account number for the installation. It may

be set as any number between 0-9999. This number does not have to match any number in the Panel.

Literal file

– This is initially blank if panel has not been worked with. If the panel has been worked with you must ensure

that the literal displayed matches the one in the panel. (See Assign Literals on P. 15)

Panel Type

– Select a type from the drop-down list

Summary of Contents for 3GS



































































































































































































































































































































































































Search results

Summary of Contents for 3GS

Reviews:

Related manuals for 3GS

Brands by name

Popular brands

Europlex 3GS, Manual

Search results

Summary of Contents for 3GS

Reviews:

Related manuals for 3GS

Brands by name

Popular brands