manualshive.com logo in svg

Epson EPL-6200, Network Manual, Page: 97 / 180

Share
Download
Epson EPL-6200 Network Manual Download Page 97

How To

97

Network Guide

5. Enter the name of the remote printer’s host.

For example:

Please enter the name of the remote host that Rprinter is attached to:
HOSTNAME Printer RPrinter is connected to host HOSTNAME

6. Confirm that the entries are correct.

For example:

Is this correct?(y/n)y

7. Specify that the RLP extended function (valid when the print server is SCO-UNIX) will 

not be used.

For example:

If HOSTNAME currently runs SCO OpenServer
Release 5 or above, it can support the extended
remote line printer protocol. Do you want to turn
on the “extended RLP protocol” support flag?
If you are not sure, answer “n”? (y/n)[n]n

8. Specify whether the created printer is to become the default printer.

For example:

Would you like this to be the system default printer? (y/n)y

9. To print, use the lpr command.

For example:

lpr -d RPrinter Print-File-Name

Summary of Contents for EPL-6200





















































































































































































Reviews:

No comments