![background image](http://html.mh-extra.com/html/epson/epl-6200/epl-6200_network-manual_109064118.webp)
Network Software
118
Network Guide
ESCP2 and FX Emulation
End
Select the way in which lines end.
Join
Select the way in which lines are joined.
Pen (0 to 6)
Select the thickness of the seven “pens” used to make the
printout.
Set button
Saves any changes.
Refresh button
Clears any changes and reloads the previous settings.
Items
Explanations
Emulation
Select ESCP2 or FX.
Font
Select a font which is used for printing.
Pitch
Select a character pitch.
Condensed
Use this option to change the character spacing.
T. Margin
Use this option to specify the distance from the top of the
sheet to the baseline of the first printable line.
Text
Use this option to set the page length in lines.
CG Table
Use the character generator table option to select the
graphics character table, or the italics table.
Country
Use this option to select one of the international symbol
sets.
Auto CR
Use the automatic carriage return option to perform a
carriage-return line-feed (CR-LF) operation whenever the
print position exceeds the right margin.
Auto LF
When you set AutoLF to Off, the printer does not send an
automatic line feed (LF) command with each carriage
return (CR). When on, the printer adds a line feed to each
carriage return it receives.
Bit Image
With Bit Image set to Dark or Light, your printer can
correctly emulate the graphics densities set with the
printer command. When you select Dark, the bit image
density is high. When you select Light, the bit image
density is low.
Zero Char
Select whether the printer prints a slashed zero or an
unslashed zero.
Set button
Saves any changes.
Refresh button
Clears any changes and reloads the previous settings.