Epson EB-1440Ui User Manual Download Page 261

Page: 261 / 295

Projector Indicator Status

261

Indicator and status

Problem and solutions

Power: Off
Status: Flashing blue
Lamp: Off
Temp: Lit orange

Projector has overheated and turned off. Leave it turned

off to cool down for 5 minutes.
• Make sure that the vents and air filter are not clogged

with dust or obstructed by nearby objects.

• Clean or replace the air filter.
• If operating the projector at high altitude, set the

High

Altitude Mode

setting to

in the projector's

Extended

menu.

Extended

Operation

High Altitude Mode

• If the problem persists, unplug the projector and

contact Epson for help.

Power: Off
Status: Flashing blue
Lamp: Lit orange
Temp: Off

Lamp has a problem.
• Check to see if the lamp is burned out, broken, or

installed incorrectly. Reseat or replace the lamp as

necessary.

• Clean the air filter.
• If operating the projector at high altitude, set the

High

Altitude Mode

setting to

in the projector's

Extended

menu.

Extended

Operation

High Altitude Mode

• If the problem persists, unplug the projector and

contact Epson for help.

Power: Flashing blue
Status: Indicator status

varies
Lamp: Flashing orange
Temp: Indicator status

varies

Replace the lamp soon to avoid damage. Do not

continue using the projector.

Power: Off
Status: Flashing blue
Lamp: Off
Temp: Flashing orange

A fan or sensor has a problem. Turn the projector off,

unplug it, and contact Epson for help.

Indicator and status

Problem and solutions

Power: Off
Status: Flashing blue
Lamp: Flashing orange
Temp: Off

Internal projector error. Turn the projector off, unplug

it, and contact Epson for help.

Power: Off
Status: Flashing blue
Lamp: Flashing orange
Temp: Flashing orange

Auto iris error. Turn the projector off, unplug it, and

contact Epson for help.

Power: Off
Status: Flashing blue
Lamp: Lit orange
Temp: Lit orange

Power error (Ballast). Turn the projector off, unplug it,

and contact Epson for help.

Power: Off
Status: Flashing blue
Lamp: Lit orange
Temp: Lit orange

Obstacle detection error. A beep sounds, and the

message "For safety purposes remove any obstacles

blocking the lens." is displayed. The projector turns off

automatically if no action is taken.
• Make sure that there are no obstacles interfering with

the projection window. Remove any obstacles.

• Clean the obstacle sensor if there are no obstacles.
If the problem persists, turn the projector off, unplug it,

and contact Epson for help.

Related Links

• "Cleaning the Air Filter"

p.245

• "Replacing the Air Filter"

p.247

• "Replacing the Lamp"

p.250

Summary of Contents for EB-1440Ui








































































































































































































































































































Search results

Summary of Contents for EB-1440Ui

Reviews:

Related manuals for EB-1440Ui

Brands by name

Popular brands

Epson EB-1440Ui, User Manual

Search results

Summary of Contents for EB-1440Ui

Reviews:

Related manuals for EB-1440Ui

Brands by name

Popular brands