FAP54 Programming
89
RESET TIME: XX
RESTORE DEFAULT VALUES
[1] YES
[2] # NO
LED ACTIVE
[1] # YES
[2] NO
FREQUENT BLINKING
[1] # YES
[2] NO
[1] LED ACTIVE
[2] FREQUENT BLINKING
[3] DEFAULT
Press key
6
to configure the reset time:
Enter the reset time in the range 1
20 seconds.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
Press key
7
to restore the factory settings in the device configuration.
To reset default values press
1
.
Per NON ripristinare i valori di default premere il tasto
2
.
The active option is signalled by # symbol.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
The factory settings values of the pulsed input module parameters are listed below:
REPETITION ACTIVE:
YES
LED ACTIVE:
YES
FREQUENT BLINKING:
YES
LOCAL RESET:
DISABLED
RESERT TIME:
3
RESET OUTPUT:
ENABLED
3.7.3.6 Configure manual call point (MN)
The manual call point configuration menu is the following:
Press key
1
to define the device LED operation.
To enable the LED blinking which signals communication between the control panel and the device, press
1
.
The active option is signalled by # symbol. To disable the LED blinking press
2
.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
Press key
2
to define the device frequent blinking operation.
To enable the module LED frequent blinking, press
1
.
To disable it, press
2
.
The active option is signalled by # symbol.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
Summary of Contents for FAP54
Page 151: ...FAP54 Programming 151 ...
