92
FAP54 Programming
RESTORE DEFAULT VALUES
[1] YES
[2] # NO
[1] LED ACTIVE
[2] FREQUENT BLINKING
[3] SINGLE/MULTI THRESHOLD
[4] RESET OUTPUT
LED ACTIVE
[1] # YES
[2] NO
[5] TYPE C
[6] RESET TIME
[7] DEFAULT
FREQUENT BLINKING
[1] # YES
[2] NO
SINGLE/MULTI THRESHOLD
[1] # SINGLE THRESHOLD
[2] MULTIPLE THRESHOLD
Press key
3
to restore the factory values in the device configuration.
To reset default values press
1
.
The active option is signalled by # symbol.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
The default parameters of the bathroom call cord device are listed below:
LED ACTIVE:
YES
FREQUENT BLINKING:
YES
3.7.3.9 Configure latched input with siren output
(IS)
The configuration menu of the latched input with siren output is shown below:
Press key
1
to define the device LED operation:
To enable the LED blinking which signals communication between the control panel and the device, press
1
.
The active option is signalled by # symbol. To disable the LED blinking press
2
.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
Press key
2
to define the module frequent blinking operation.
To enable the module LED frequent blinking, press
1
.
To disable it, press
2
.
The active option is signalled by # symbol.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
Press key
3
to configure the working mode, in single or multi threshold, of the module:
Press
1
to set the module operation with single threshold.
Press
2
to set the module operation with multiple threshold.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
Summary of Contents for FAP54
Page 151: ...FAP54 Programming 151 ...
