96
FAP54 Programming
LED ACTIVE
[1] # YES
[2] NO
BASE BLINKING
[1] # YES
[2] NO
VOLUME: XXX
FREQUENT BLINKING
[1] # YES
[2] NO
TONES: X
SYNCHRONIZED ACTIVATION
[1] # YES
[2] NO
Press
2
to configure the green LED operation.
To enable the blinking of the LED that signals the dialogue between the control panel and the device, press
1
.
The active option is signalled by # symbol. Press
2
to disable it.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
Press
3
to configure the frequent blinking operation.
Enable the green LED frequent blinking by pressing
1
.
Disable it by press
2
.
The currently selected option is marked by the
#
symbol.
Press
OK
to confirm the selection. Press
ESC
to discard the changes and go back to the previous menu.
Press
4
to configure the behaviour of the red alarm signalling LEDs of the device:
Press
1
to enable the red alarm signalling LEDs to blink when the device is activated.
The currently selected option is marked by the
#
symbol. Press
2
to disable it.
Press
OK
to confirm the selection. Press
ESC
to discard the changes and go back to the previous menu.
Press
5
to set the sound volume level:
Enter the volume level (0: sound off, 1: low, 2: medium, 3: high) and confirm with
OK
.
Press
ESC
to discard the changes and go back to the previous menu.
Press
6
to set the tone played by the device upon its activation:
Enter the tone (range 1
4) and confirm with
OK
.
Press
ESC
to discard the changes and go back to the previous menu.
Press key
7
to enable or disable the synchronized activation function.
To enable synchronized activation of the bases and plates, press
1
.
To disable it, press
2
.
The active option is signalled by # symbol
With
OK
you confirm the configuration. With
ESC
you go back to the previous menu without changing the
current state.
Summary of Contents for FAP54
Page 151: ...FAP54 Programming 151 ...
