64
FAP54 Programming
GROUP:
OPERATIVE MODE
[1] FIRE ALARM
[2] TECHNOLOGICAL
[1] SINGLE KNOCK
[2] SINGLE KNOCK W/DELAY
[3] MULTIPLE KNOCK
[4] MULTIPLE KNOCK W/DELAY
[1] SINGLE KNOCK
[2] SINGLE KNOCK W/DELAY
[3] MULTIPLE KNOCK
[4] MULTIPLE KNOCK W/DELAY
[5] ALARM 1 ONLY
3.3.2.4 Mode
Enter the group number and then press
OK
to confirm:
The group operative mode selection menu will be displayed:
[1] FIRE ALARM
When an alarm condition occurs, all the output modules, alarm relays and indicators are activated.
[2] TECHNOLOGICAL
When an alarm condition occurs, all the output modules are activated.
If the FIRE ALARM mode is selected, the following menu will be shown:
For groups programmed in TECHNOLOGICAL mode, instead, the following menu will be shown:
Depending on the chosen mode, the user will be asked to insert a set of configuration parameters, according to the
table below (X indicates the parameters to be inserted for each mode; e.g., for a group programmed in FIRE ALARM –
MULTIPLE KNOCK W/DELAY mode, it is necessary to program the GROUP DELAY, the WEIGHT and the GENERAL
ALARM option).
MODE
GROUP
DELAY
WEIGHT
GENERAL
ALARM
SIGNALLING
FIRE ALARM
SINGLE KNOCK
X
FIRE ALARM
SINGLE KNOCK W/DELAY
X
X
FIRE ALARM
MULTIPLE KNOCK
X
X
FIRE ALARM
MULTIPLE KNOCK W/DELAY
X
X
X
TECHNOLOGICAL
SINGLE KNOCK
X
TECHNOLOGICAL
SINGLE KNOCK W/DELAY
X
X
TECHNOLOGICAL
MULTIPLE KNOCK
X
X
TECHNOLOGICAL
MULTIPLE KNOCK W/DELAY
X
X
X
TECHNOLOGICAL
ALARM 1 ONLY
X
Summary of Contents for FAP54
Page 151: ...FAP54 Programming 151 ...