86
FAP54 Programming
RESTORE DEFAULT VALUES
[1] YES
[2] # NO
[1] LED ACTIVE
[2] REPETITION ACTIVE
[3] FREQUENT BLINKING
[4] SINGLE/MULTI THRESHOLD
REPETITION ACTIVE
[1] # YES
[2] NO
LED ACTIVE
[1] # YES
[2] NO
[5] RESET OUTPUT
[6] RESET TIME
[7] RECOVERY TIME
[8] DEFAULT
FREQUENT BLINKING
[1] # YES
[2] NO
Press key
8
to access the menu for resetting the values established by factory in the device configuration:
To reset default values press
1
.
The active option is signalled by # symbol.
With
OK
you confirm the selection that is currently active.
With
ESC
you go back to the previous menu without changing any parameters.
The factory setting values of the output module parameters are listed below:
REPETITION ACTIVE:
YES
LED ACTIVE:
YES
FREQUENT BLINKING:
YES
MODE:
0
HOLD-OFF:
0
FEEDBACK:
0
EXTERNAL POWER SUPPLY: NO
Moreover, the module will be set as type C.
3.7.3.4 Configure latched input module
(LI)
The latched input module configuration menu is the following:
Press key
1
to define the device LED operation:
To enable the LED blinking which signals communication between the control panel and the device, press
1
.
The active option is signalled by # symbol. To disable the LED blinking press
2
.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
Press key
2
to define the module alarm repetition output operation:
To enable the module alarm repetition output, press
1
.
To disable the alarm repetition output at the LED blinking press
2
.
The active option is signalled by # symbol.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
Press key
3
to define the module frequent blinking operation.
To enable the module LED frequent blinking, press
1
.
To disable it, press
2
.
The active option is signalled by # symbol.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
Summary of Contents for FAP54
Page 151: ...FAP54 Programming 151 ...
