FAP54 Programming
75
CIRCUIT: XX DEVICE: XXX TYPE: OM(C)
NAME: XXXXX
TYPE: OUTPUT MODULE
ASSOCIATED TO: XXXXXXXXXXX
[1] ENTER PASSWORD
[2] VIEW PASSWORD
ENABLE PASSWORD
[1] # YES
[2] NO
PASSWORD Nr:
PASSWORD No: XX
(LEVEL XX)
ENTER PASSWORD: XXXX_
SILENCE SIREN YES/NO
GENERAL ALARM YES/NO
ACTIVE ON ALARM 1/2 /FAULT /MAINT.
TONES A1/A2 YES/NO
The page above is replaced by the following page when the output module is an addressable base or an
addressable sounder:
By pressing the key
>
from either one of the screens above, the following screen will be displayed with the
associations of the output module with the zones, groups of devices and groups of zones.
By pressing the key
>
the next associations is shown.
After displaying the last association, the first screen with the output module parameters is shown again.
3.5 PASSWORD
The control panel manages 10 passwords on 3 different levels:
one password of level 1 (password 1): currently not used
four passwords of level 2 - users (password from 2 to 5): all the functions, but access to the programming
menu, are enabled.
four password of level 2 - advanced (password 6 to 9): like level 2 users + event indicator.
one password of level 3 (password 10): total control (administrator).
When the user accesses the password menu, the following screen is displayed:
By pressing
OK
key to confirm configuration, the active option is marked by # symbol.
By pressing
ESC
it is possible to return to the previous menu.
If the passwords are enabled, the following menu is displayed:
If you choose to enter (change) a password, you will be asked to specify the number of the password to be changed:
After entering the number of the password to be changed and confirming with
OK
, the following screen view will be
displayed where the password can be edited:
The password has a fixed format and can only consist of 5 digits.
Summary of Contents for FAP54
Page 151: ...FAP54 Programming 151 ...
