FAP54 Programming
91
TYPE C
[1] # OFF
[2] ON
RESTORE DEFAULT VALUES
[1] YES
[2] # NO
LED ACTIVE
[1] # YES
[2] NO
FREQUENT BLINKING
[1] # YES
[2] NO
[1] LED ACTIVE
[2] FREQUENT BLINKING
[3] DEFAULT
Press key
4
to establish whether the module is a Type C one or not:
Press
1
to establish that the module is NOT a Type C one.
Press
2
to establish that the module is a Type C one.
Confirm selection with
OK
. Press
ESC
to go back to the previous menu and keep the current configuration.
Press key
5
to restore the factory values in the device configuration.
To reset default values press
1
.
The active option is signalled by # symbol.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
The default parameters of the concentrator module are listed below:
LED ACTIVE:
YES
FREQUENT BLINKING:
YES
SINGLE KNOCK / DOUBLE KNOCK: DOUBLE KNOCK
TYPE C:
YES
3.7.3.8 Configure bathroom call cord (TB)
The configuration menu of the bathroom call cord is shown below:
Press key
1
to define the device LED operation.
To enable the LED blinking which signals communication between the control panel and the device, press
1
.
The active option is signalled by # symbol. To disable the LED blinking press
2
.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
Press key
2
to define the device frequent blinking operation.
To enable the module LED frequent blinking, press
1
.
To disable it, press
2
.
The active option is signalled by # symbol.
With
OK
you confirm selection. With
ESC
you go back to the previous menu without changing the current state.
Summary of Contents for FAP54
Page 151: ...FAP54 Programming 151 ...
