8 Entry/Exit Timers and System Tones
iConnect Installation Manual
44
8.5.1.
Exit Delay Tones
To program tones sounded by the wireless siren during the Exit delay:
1.
From the Programming menu, select Tones, Exit Tones, WL Siren [9311].
2.
Select Enabled or Disabled.
To program tones sounded by the built-in siren during the Exit delay:
1.
From the Programming menu, select Tones, Exit Tones, Siren [9312].
2.
Select No Tones, Four Tones or Continuous Tones.
8.5.2.
Entry Delay Tones
To program tones sounded by the wireless siren during the Entry Delay:
1.
From the Programming menu, select Tones, Entry Tones, WL Siren [9321].
2.
Select Enabled or Disabled.
To program tones sounded by the built-in siren the Entry Delay:
1.
From the Programming menu, select Tones, Entry Tones, Siren [9322].
2.
Select No Tones, Four Tones or Continuous Tones.
8.5.3.
Arming Tones
To program tones sounded by the wireless siren on arming:
1.
From the Programming menu, select Tones, Arm Tones, WL Siren [9331].
2.
Select Enabled or Disabled.
To program tones sounded by the built-in siren on arming:
1.
From the Programming menu, select Tones, Arm Tones, Siren [9332].
2.
Select Enabled or Disabled.
8.5.4.
Disarming Tones
To program tones sounded by the wireless siren on disarming:
1.
From the Programming menu, select Tones, Disarm Tones, WL Siren [9341].
2.
Select Enabled or Disabled.
To program tones sounded by the built-in siren on disarming:
1.
From the Programming menu, select Tones, Disarm Tones, Siren [9342].
2.
Select Enabled or Disabled.
8.6.
Home Automation Tones
Home Automation tones are sounded when you control HA units using keypads or keyfob transmitters.
To program built-in siren Home Automation tones:
1.
From the Programming menu, select Tones, HA Tones [935].
2.
Select Enabled or Disabled.
8.7.
System Trouble Tones
System trouble tones are sounded to provide an audible indication that a system trouble condition exists. On hearing
these tones the user is then able to determine which trouble condition is present from the front panel keypad. For
additional information, see p. 15,
3.5.1 System Trouble Tones.
8.7.1.
Trouble Tones
The Trouble Tones option allows you to enable or disable audible trouble annunciation.
To program the Trouble Tones option:
1.
From the Programming menu, select Tones, Trouble Tones [936].
2.
Select Enabled or Disabled.
Summary of Contents for iconnect
