Electronics Line iconnect, Installation Manual

Page: 12 / 140

2 System Installation
iConnect Installation Manual
8
2.2. Installation Procedure
The iConnect Control System Kit consists of:
• Control System
• Quick Start Installation Guide
• Quick User Guide
• Mounting Guide
• Plastic bag with Cable Clamp, Cable Clamp screw, Housing Screw,
After unpacking the kit and making certain that you have all the necessary equipment, it is recommended that you
install the system as follows:
STEP 1: Temporarily power up the system and install the SIM card.
STEP 2: Selecting language and defaults
STEP 3: Establishing an RF wireless network.
STEP 4:
Register the transmitters.
STEP 5: Test the chosen mounting location.
STEP 6: Program the relevant Internet options.
STEP 7: Permanently install the Control System and transmitters.
2.2.1. Step 1 – Temporarily Power up the System and Install SIM Card
In order to register and test transmitters, it is necessary to temporarily power up the Control System before
permanently installing it.
1.
Remove the housing screw located at the bottom of the front cover as shown in Figure 2-4.
2. Insert a screwdriver between the front and back panels of the housing; carefully twist it to release the tabs.
3. Lift the front cover away from the back of the housing. You will notice that the front cover is attached to the back
with two fastening bands and the hardwire LCD keypad’s flat cable.
Figure 2-4: Opening the Housing
The Control System is supplied without AC cable. Please use Standard Two-Pin European
Plug cable only. For the Cable Clamp, use the screw and the washer supplied in your kit to
replace the PCB screw.
4. Open the SIM card holder on the Communication Board, insert the SIM card.
5. Close the Housing.
6. Plug the Power AC cable into the wall outlet.
In five minutes since power-up, the siren will sound. To silence the siren, enter your user
code (default user code is 1234).
At this stage, do not connect the backup battery. Ignore any trouble conditions that may appear on the LCD Display
(e.g. Low Battery)