Electronics Line iconnect Installation Manual Download Page 127 | Manualshive

Page: 127 / 140

background image

Appendix C: Web User Application

iConnect

Installation Manual

123

When using the
Smartphone application
service, the main page
looks the following way:

Figure C- 3: The Main Page (Smartphone Application)

Menu Bar

The Menu Bar includes the Main Menu, arm/disarm options list and the Log Off button. The Main Menu offers links to
various pages in the Web Application. Use the Logoff button on the right side menu to properly close the session.The
following options are available from the Main Menu:

•

Home – pressing the Home button allows the user to return to the Main page at any time

•

Automation – allows control or scheduling of automated lights and appliances.

•

Video – provides access to view streaming video from IP cameras.

•

My Account – offers various options including user code and contact management, event log viewing and

zone bypass.

•

Help – offers online explanations on how to use the Web Application plus FAQ and customer support

options.

Status Bar

The Status bar displays information on your system’s status and the name of the user currently logged in. Above the
status bar, the time when the system status display was last updated is shown. This information is displayed according
to the local time at the control system. When logging into the WUApp with a GPRS Control System, the system status
refreshes automatically, and can be refreshed manually as well. To refresh the current system status, click the Refresh
Status button on the right-hand side of the Status bar.

Workspace

The workspace offers additional links to the following pages of the application: Users and Codes, History, Automation,
Alerts, Change Password, Video. When you choose a page, either from the Main Menu, or from the workspace, the
page is displayed in the workspace. For example, if you choose Automation from the Main Menu, a list of automated
appliances is displayed in the workspace.

SMS alerts relate only to SMS sent from ELAS (WEB User Application).

«
...
125
126
127
128
129
...
»

Summary of Contents for iconnect













































































































































Reviews:

No comments

Related manuals for iconnect

Brand: ABB Pages: 370

Brand: ABB Pages: 17

Brand: ABB Pages: 104

Brand: ABB Pages: 120

Brand: ABB Pages: 42

Brand: Watts Pages: 2

Brand: Hamworthy Pages: 10

Brand: Magnescale Pages: 132

Brand: Datavideo Pages: 8

Brand: ICM Controls Pages: 2

Brand: TANDBERG Pages: 2

6000 MXP Profile

Brand: TANDBERG Pages: 2

3000 MXP Profile

Brand: TANDBERG Pages: 2

Brand: TANDBERG Pages: 11

Media Processing System MPS 800

Brand: TANDBERG Pages: 106

Brand: TANDBERG Pages: 44

Brand: TANDBERG Pages: 2

Brand: TANDBERG Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands