7 Devices
iConnect Installation Manual
40
7.4.
Keyfobs
The iConnect Control System supports two types of keyfob transmitter, EL-4711M/P and EL-4714. You can register
up to 19 keyfobs to the system. Figure
7-3 illustrates these transmitters and the functions assigned to their buttons. For
information on registration, deletion and deactivation, see p. 35,
7.2. Wireless Devices. For descriptor editing, see p. 35,
7.1 Device Descriptors.
EL-4714
EL-4711M/P
Figure
7-3: Keyfob Button Assignments
The following sections explain the programming options exclusive to the EL-4714 keyfob transmitter. These
programming options are not relevant to the EL-4711M/P.
For panic Alarm activation with the keyfob, see p. 19,
3.7.8, Alarm Activation.
7.4.1.
Keyfob Type
You can define each registered keyfob as Controlled or Non-controlled. A Controlled keyfob causes the system to send
arm/disarm event messages to the central station. Non-controlled keyfobs never send arm messages and send a disarm
message only if the system is disarmed after an alarm occurrence.
To program a keyfob type:
1.
From the Programming menu, select Devices, Keyfobs [912].
2.
Select the keyfob you want to program.
3.
From the keyfob’s sub-menu, select Type [#2]; the current setting is displayed.
4.
Select Controlled or Non-controlled.
7.4.2.
Keyfob Button Assignment (EL-4714)
The EL-4714 includes two buttons (B1 and B2) that you can program individually.
The default functions for B1
is part arming and for B2
, perimeter arming.
Alternatively, you can program these buttons to control a specific HA unit or PGM output.
To program buttons B1 and B2:
1.
From the Programming menu, select Devices, Keyfobs [912].
2.
Select the keyfob you want to program.
3.
From the keyfob’s sub-menu, select either B1 Assign [#4] or B2 Assign [#5].
4.
Select the HA unit you want the button to control (01-16, or 30, 31 for PGM output) or enter 00 to program the
button’s default function; then press '
√ʹ.
7.4.3.
SOS Panic Alarm Activation (EL-4714)
Using the four-button keyfob, you can activate an SOS Panic alarm by pressing two buttons simultaneously.
Medical/Panic
Emergency
B2: Perimeter
Arm, HA/PGM
B1: Part Arm,
HA/PGM
Full Arm
Disarm
Summary of Contents for iconnect
