Patient Monitor User Manual Alarm Information
- 74 -
Message
Cause
AG Agent Estimated
(Dräger AG module)
The AG module cannot identify the present agent(s) but
only give an estimation of one of the present agents. The
reason is the presence of either a mixture or too many
anesthetic.
AG Interference
AG module is interfered by external device when working.
Warm-up over
The monitor displays this message after taking the sensor
out of the bracket and warm-up is over.
Measure over
After the Predict measuring is over, the data and message
display on the interface.
Measure time out
No measuring result after the module entering Predict
state for 30 s.
Printer Busy
The monitor is performing a print job.
No Default Printer
No default printer has been set.
Incomplete parameter input,
unable to score
In Warning-Score System interface, parameters are not
completely input.
No WIFI module detected
No Wi-Fi module is detected.
SpO
2
Noisy Signal
(Nellcor SpO
2
module)
There is interference with SpO
2
measurement signals due
to patient movement, ambient light, electrical interference
or else.
Recorder Setup Needed
The user presses the
RECORD
button or shortcut key
Record
when Recorder is not configured.
NIBP Simul
NIBP Simul
function
is turned on.
The space in U disk is less
than 300 M. Please clean it up.
The remaining space of U disk is less than 300 M.
Please input user password
first.
Attention! Private
information included in the
data.
When user exports data from the internal storage device.
More than five consecutive
password errors
Continuously enter the wrong password for more than 5
times.
