Patient Monitor User Manual Printing Patient Reports
- 206 -
Chapter 25 Printing Patient Reports
Patient reports can be printed out by an HP series laser printer connected with the monitor.
NOTE:
Use the printer HP Laser Jet P2055dn, HP LaserJet Pro 400 M401n and HP LaserJet
600 M602, which are tested to be compatible with the monitor.
25.1 Printer Settings
You can configure the printer settings on the monitor before printing out patient reports. Click the
shortcut key
or select
Menu
>
System Setup
>
Printer Setup
, and you can
Assign a locally networked printer by selecting it from the
Printer
list.
Search all available printers networked with the monitor by clicking
Search Printer
.
Enable or disable double side printing by setting
DoubleSide Print
to
On
or
Off
.
The reports will be printed out on A4 paper and with single side by default.
NOTE:
1 You need to search all available printers on the local network for the first time you
use a networked printer.
2 Make sure the IP of the printer and the IP of the monitor share the same network
segment.
3 Do not click
Search Printer
during printing patient reports, or the printer might stop
the current print job.
4 When a printer simultaneously received print jobs from several networked monitors,
a print job conflict may occur. Check the use status of the monitors and the printers
on the same network prior to use and avoid print job conflicts.
5 Make sure there is no lack of paper before printing patient reports, or the alarm
Printer Unavailable
will be triggered.
25.2 Starting and Stopping Report Printing
You can print out ten types of patient reports following the procedure below:
Report Type
Procedure
Trend graph report
In the
Trend Graph
window, click
to start printing.
Trend table report
In the
Trend Table
window, click
to start printing.
Alarm waveform report
In the
Alarm Review
window, click
to start printing.
NIBP review report
In the
NIBP Review
window, click
to start printing.
Arrhythmia review report
In the
ARR Review
window, click
to start printing.
