Patient Monitor User Manual Other Functions
- 210 -
CAUTION
1 Not all the removable devices are compatible with the monitor, Use the removable
devices recommended by EDAN.
2 Do not set the read-only switch on the removable device to on when the removable
device is inserted in the monitor.
3 It is recommended to format the USB flash drive to the FAT file type via PC prior to
use.
26.3.4 Reviewing Data Stored in the Storage Device
To review data stored in the storage device, select
Menu
>
Review
>
History Patient
. You can
choose to review the storage device as desired from the pop-up list. Choose a patient from the list
to review the data including patient information, trend graph, trend table, NIBP measurements,
arrhythmia event, alarm event, 12-lead analysis and waveform.
26.3.4.1 Reviewing Full Disclosure Waveform
Select
Menu
>
Review
>
History Patient
>
Full Wave.
to enter the full disclosure review
interface. Select
Wave Setup
to set the desired waveform (Maximum: 1) to be displayed on the
full disclosure review interface.
26.3.5 Deleting Data Stored in the Storage Device
To delete data of one patient, choose the patient from the list after selecting
Menu
>
Review
>
History Patient
, and then click
Delete data
on the
Review
menu. Further confirmation of
deletion is required.
To delete data of all patients, select
Menu
>
Review
>
History Patient
and click
Delete all data
on the
History Patient Review
menu. Further confirmation is required.
26.3.6 Exporting Data Stored in the Internal Storage Device
To export data of one patient from the internal storage device to the removable device, choose the
patient from the list after selecting
Menu
>
Review
>
History Patient
, and then click
Export
Current Data
on the
Review
menu.
To export data of all patients, select
Menu
>
Review
>
History Patient
and click
Export all data
on the
History Patient Review
menu.
NOTE:
When you export data from the internal storage device, the user password is required,
and there is a prompt message in the password inputting interface:
Please input user
password first. Attention! Private information included in the data.
If password is
correct, the data will be successfully exported into the selected removable device,
otherwise, the data export fails, and the interface displays:
Password Error
.
