![background image](http://html1.mh-extra.com/html/eaton/sefelec-1500m/sefelec-1500m_user-manual_3893778073.webp)
SEFELEC1500M Instructions
72
V1.06
9.3.
USING EXTERNAL POWER SUPPLY WITH THE PICOAMMETER
The device provides the possibility of using an external power supply for measuring currents. If
this power supply can be controlled by analogue voltage 0-10 VDC the device can send a value
proportional to the desired voltage. For this, it is necessary to enter the maximum value of the
output voltage.
IMPORTANT
In the case of an external source > 1,500 VDC it is necessary to use a protec-
tive box (BAPA) and for voltages > 10,000 VDC a protective resistor of the
RLHT series must be added.
To set up an operating mode with an external voltage press on the active area on the Power
Supply line :