![background image](http://html1.mh-extra.com/html/eaton/sefelec-1500m/sefelec-1500m_user-manual_3893778087.webp)
SEFELEC1500M Instructions
86
V1.06
NOTE
Press the START push-button. For safety reasons, it is necessary to press for
a time > 1 second in order for the device to switch to MEASUREMENT mode,
in the event the pressing is too short an information message will be dis-
played briefly on the LCD screen.
The measuring cycle unfolds according to the time for rising, maintaining and falling with display
of the resistance, voltage and current according to the following screen:
At the end of the test the display indicates if the measurement is between Imin and Imax, i.e.
considered as PASS.
START