![background image](http://html1.mh-extra.com/html/eaton/sefelec-1500m/sefelec-1500m_user-manual_3893778128.webp)
SEFELEC1500M Instructions
127
V1.06
14.
ETHERNET INTERFACE
NOTE
The ETHERNET function must be selected in the configuration menu,
INTERFACE line: ETHERNET
The test and measuring instruments of the SEFELEC series can be equipped with an inter-
face of the Ethernet type. It allows all of the instruments in the range to be integrated into an
automatic test or measuring system, whether intended for manufacturing control or for input
control.
The interface can be accessed through a RJ45 connector located at the rear of the device.
Implementing the safety loop circuit is indispensable. Controlling the device
via Ethernet and therefore generating a dangerous voltage can be done from a point
where visual control on the device is not possible.