SEFELEC1500M Instructions
20
V1.06
4.2.2.
OPTIMISING THE SAFET Y
In any case, a properly used safety circuit offers the best protection.
This safety system protects the wired assembly being tested as well as the operator. It is inde-
pendent of the voltage applied and current injected for the measurements.
WARNING
Risk of electric shock!
•
Access to the device must be reserved for personnel who have received
training in electrical hazards.
•
The wired assembly being tested should not be handled during the test
(risk of measurement errors and electric shock).
A double safety circuit is provided as standard.
WARNING
High voltage!
•
For dangerous voltages, signalling using a suitable Red/Green lamp (Option
SEFO-CO160
) must be implemented.
EATON on request can supply a locking system used during the test to control a type CA001,
CA002 (image below) or CA003 safety cage in order to conduct the tests in complete safety.