![background image](http://html1.mh-extra.com/html/eaton/sefelec-1500m/sefelec-1500m_user-manual_3893778106.webp)
SEFELEC1500M Instructions
105
V1.06
Press the yellow zone to set the condition:
The condition function requires the following information:
• The number of the step to which the condition relates
Enter a step number corresponding to a measurement function. In the case of a step
number that does not correspond to a measurement function, the result of the step will
always be GOOD and will make a non-conditional jump.
• The condition of the chosen step
Choose the result of the step: Good, Bad, Error, Bad or Error, Not yet tested
• The action to be taken if the condition is fulfilled
Choose: Stop Sequence, goto next (go to next step), goto xx (go to step xx)
• The action to be taken if the condition is not fulfilled
Choose: Stop Sequence, goto next (go to next step), goto xx (go to step xx)