SEFELEC1500M Instructions
156
V1.06
Cleaning the device
Clean the equipment only with a soft cloth which may be slightly damp with water. For the
LCD screen, use a microfiber cloth.
Calibration
We recommend that our equipment should be calibrated once a year. The calibration period
depends on how often the measuring device is used (the EATON technical service can ad-
vise on the recommended calibration period). The testers must be calibrated by qualified
personnel who are fully familiar with the procedure using calibration equipment that has been
certified. Our after sales service can carry out this annual calibration promptly and at com-
petitive rates.
Maintenance
Our departments are particularly authorised to carry out regular inspections and mainte-
nance of the measuring device.
However, the customer’s maintenance services must ensure that the testers are kept dust
free, that dust filters are changed (depending on the model) and the ventilation kept clear. If
used in a dusty environment, the inside of the measuring device should be vacuumed (com-
pressed air should not be used).
In workshops with floors that are cold or washed with water, the measuring device should be
installed on a stand in order to limit condensation.
We recommend:
checking or having the measurement functions checked at least once a year. Beyond this
timeframe, we no longer guarantee the accuracy of measurements and correct operation of the
equipment.
Maintenance periods:
Monthly
Clean filters
Annually
Check measurement
Annually
Remove dust