![background image](http://html1.mh-extra.com/html/eaton/sefelec-1500m/sefelec-1500m_user-manual_3893778049.webp)
SEFELEC1500M Instructions
48
V1.06
7.1.
SETTING THE MEASUREMENT TIME
To change the measurement time, press the active area of the "Time" line to obtain:
The Permanent mode does not use the internal timer of the device and the measurement will be
taken by pressing the START push-button until the STOP push-button is pressed.
NOTE
Pressing the START push-button
: for safety reasons, it is necessary to
press for a time > 1 second in order for the device to switch to MEASURE-
MENT mode, in the event the pressing is too short an information message
will be displayed briefly on the LCD screen.
STOP
START