SEFELEC1500M Instructions
12
V1.06
1.4.
DECLARATION OF CONFORMITY
SEFELEC1500M measuring devices are compliant with the regulatory provisions defined by:
European directives
2006/95/EC
pertaining to the safety of electrical equipment intended for use within cer-
tain voltage limits (LVD)
2004/108/EC
pertaining to electromagnetic compatibility (EMC)
Harmonised standards
IEC 61010-2-034 January 2017 edition
Safety requirements for electrical equipment
for measurement, control, and laboratory use.
EN61326 -1 01/07/2006 edition
Electrical equipment for measurement, control
and laboratory use. EMC requirements.
A copy of the Declaration of Conformity document can be found at the end of this notice..
1.5.
QUALIFICATION OF THE PERSONNEL
These instructions are intended for qualified persons, who have received instructions prior to
using the device and who have had training authorising work on electrical devices. The instruc-
tions provide the information required for mounting and correctly using devices of the SE-
FELEC1500M series.
The instructions for use and the corresponding technical documents must be read and under-
stood before using the device and the instructions must be observed.
1.6.
EXCLUSION OF LIABILITY
This documentation presents the devices in their standard version.
Despite in-depth verification of the content of the instructions, we cannot guarantee that there
are absolutely no errors. The manufacturer assumes no liability for any inaccuracies or omis-
sions.
In case of doubt or for technical questions, please contact your technical representative.