SEFELEC1500M Instructions
109
V1.06
Either a "default" name sequence calling a megohmmeter function with a parameter set called
"default" followed by a text message and a call to a megohmmeter function with a set of parame-
ters called "default" and a loopback 100 times.
This corresponds to the following sequence:
When the START button on the front panel of the device is lit in green, it is then possible to start
the sequence
NOTE
Press the START pushbutton. For security reasons, it is necessary to press
for a time> 1 second for the device to enter the MEASURE mode, in case of
too brief press an information message will be displayed momentarily on the
LCD screen.
The first step of the sequence will execute by displaying a measurement screen in Megohmme-
ter mode:
START