![background image](http://html1.mh-extra.com/html/eaton/sefelec-1500m/sefelec-1500m_user-manual_3893778139.webp)
SEFELEC1500M Instructions
138
V1.06
14.5.6.
LIST OF ETHERNET COMMANDS
The syntax of the commands sent over the
ETHERNET
connection is compliant with the
IEEE488-2
standard (1992 revision).
Reminder of the numerical formats according to standard
IEEE488-2
:
Format
NR1: +/-<digit>...<digit>
Format
NR2: +/-<digit>...<digit>.<digit>...<digit>
Format
NR3: +/-<digit>...<digit>.<digit>...<digit>E+/-<digit>...<digit>
NOTE: The code in parentheses are the expanded codes that can be interpreted by the
device.
14.5.7.
COMMANDS
The command set of the
ETHERNET
option of the
SEFELEC
range is the same as that of
the
RS232
interface. It is described in detail in the paragraph
RS-232C Interface.
14.5.8.
ERROR MESSAGE
the message
CONNECTION IMPOSSIBLE
appears, two cases are to be considered:
The device has not been identified, press ETHERNET again
You left a communication session open with the device, close the connection and
press ETHERNET again