DynaVox DV4 Quick Start Manual Download

Page: 54 / 97

DynaVox Technologies

The Modify Pages Menu

The DynaVox Series 4 software also offers a

Modify Pages

menu that allows you to make changes to the

features (but not the content) of several pages at one time. This menu can be accessed through the

Page

Browser

menu with the following steps:

1. Select the pull-down menu button in the title bar at the top of the touch screen.

2. Select

Setup

in the main pull-down menu.

3. Select

Tools Menu

in the second pull-down menu. The

Tools

menu will open.

4. Select the

Page Browser

button. The

Page Browser

menu will open.

5. In the left viewport, select the page set folder that includes the pages you want to modify.

6. In the right viewport, select the check box beside every page you want to modify.

Note:

The

Modify Pages

menu cannot be used to modify the page that is currently open. If

you want to make changes to the communication page that you are currently using,
you must use the

Page Navigator

to open a new page before you can begin to select

pages for the

Modify Pages

menu.

7. Select the

Modify Pages

button. The

Modify Pages

menu will open.

Summary of Contents for DV4


































































































Search results

Summary of Contents for DV4

Reviews:

Related manuals for DV4

Brands by name

Popular brands

DynaVox DV4, Quick Start Manual

Search results

Summary of Contents for DV4

Reviews:

Related manuals for DV4

Brands by name

Popular brands